Stationary Crushing Plant

CS series cone crusher

Get CS series cone crusher price & support now! :

CS series cone crusher is a kind of high efficiency spring cone crusher, which integrate optimization of cavity-type and reasonable stoke and advanced technology, and follows the conception of laminated crushing principle of more crushing and less grinding. CS series Cone Crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product.

CS series cone crusher imports and absorbs the foreign technology. It is a high-performance cone crusher based on the principle of layer crushing and more crushing less grinding. It is an integration of high frequency, optimized chamber and reasonable stroke.

CS series cone crusher

Features of CS series cone crusher :

1.High performance:
through perfection design of chamber shape and adoption of reasonable speed and stroke, the machine will work more under the same mantle diameter. Comparing with spring cone crusher of the same type, it has higher performance and productivity.
2.Composition of grain shapes is fine:
with the principle of lamination crushing, proportion of the cubic shape products is much bigger and that of the needle shape ones is much less, and the grain shape is more even.
3.Good stability:
while there are mental stocking following into the machine, iron resistant protection device will relieve them automatically and reset again. This device has fixed outlet reset point, after passing the crushing chamber, iron materials are able to return to the original outlet.
4.Chamber cleaning is quite convenient:
if the spring cone crusher stop working under load, the hydraulic chamber cleaning system will cleaning the crushing chamber rapidly, which can save time greatly.
5.High reliability:
main draft with a big diameter is adopted, heavy frame and automatical oil controll system of independent thin oil lubrication system, which can guarantee durability and reliability of equipments.

Technical Parameter Of CS series Cone Crusher :

Mm to inch conversion: 25.4millimeters=1 inch
Note: the capacity is based on limestone, it also will be affected by hardness, humidity,method and operation,final product distribution of material.
Standard:

Model Dia. mm (inch) Cavity Feed Opening Outlet Setting (mm) Shaft Speed (r/min) Power (kw) Capacity (t/h) Weight (t) Dimension (mm)
Closing Side (mm) Open Side (mm)
CSB75 900 (3') Fine 83 102 9-22 580 75 45-91 15 2821×1880×2164
Coarse 159 175 13-38 59-163
CSB160 1295 (4 1/4') Fine 109 137 13-31 485 185 109-181 27 2800×2342×2668
Medium 188 210 16-38 132-253
Coarse 216 241 19-51 172-349
CSB240 1650 (5 1/2') Fine 188 209 16-38 485 240 181-327 55 3911×2870×3771
Medium 213 241 22-51 258-417
Coarse 241 268 25-64 299-635
CSB315 2134 (7') Fine 253 278 19-38 435 315 381-726 110 4613×3251×4732
Medium 303 334 25-51 608-998
Coarse 334 369 31-64 789-1270

Short Head:

Model Dia. mm (inch) Cavity Feed Opening Outlet Setting (mm) Shaft Speed (r/min) Power (kw) Capacity (t/hour) Weight (t) Dimension (mm)
Closing Side (mm) Open Side (mm)
CSD75 914 (3') Fine 13 41 3-13 580 75 27-90 15 2821×1880×2410
Coarse 33 60 3-16 27-100
CSD160 1295 (4 1/4') Fine 29 64 3-16 485 160 36-163 27 2800×2342×2668
Medium 54 89 6-16 82-163
Coarse 70 105 10-25 109-227
CSD240 1676 (5 1/2') Fine 35 70 5-13 485 240 90-209 55 3917×2870×3771
Medium 54 89 6-19 136-281
Coarse 98 133 10-25 190-336
CSD315 2134 (7') Fine 51 105 5-16 435 315 190-408 110 4130×3251×4454
Medium 95 133 10-19 354-508
Coarse 127 178 13-25 454-599

Note: Any change of  CS series Cone Crusher technical data shall not be advised additionally.

Recommended Products: Spring Cone Crusher      Impact Crusher