Stationary Crushing Plant

Jaw Crusher

Get Jaw Crusher price & support now! :

We have been a leading manufactuer of jaw crushers for over 20 years, which is one of our major business. Jaw Crusher can be used to crush various mineral stones and bulk materials to medium size. PE series Jaw crusher is made by Kefid Machinery features high crushing ratio, uniformly final product, simple structure, stable operation, easy maintenance and economical operating cost.

As one of the leading manufacturers, Zhengzhou Kefid Machinery co, LTD takes an absolute lead in jaw crusher design and production. Jaw crusher is used to crush different mineral of large-block into medium size. The compressure strength of the raw material is required to be less than 320Mpa. There are many different types of jaw crusher: fine crushing and coarse crushing are included; besides, the size of raw materia can be range from 125mm-750mm. Jaw crusher is widely used in mine, metallyrgy, constrction, highway, railway, water conservancy, chemical industry, fireproof material and ceramics etc. for primary crushing.

Jaw Crusher

Features of Jaw Crusher :

There are two types: coarse crushing and fine crushing, it will be the ideal equipment for primary crushing.Compare a KEFID jaw crusher with any other jaw crusher on the market. Immediately you’ll see this machine was built for demanding production, strength and a lifetime of dependability.

Kefid PE Jaw crusher  is of bend and press type. Moter will drive the belt and the belt wheel to force the mobile jaw to move up and down through eccentric draft, while the mobile jaw is lifting, angle between the toggle and the mobile jaw will become bigger, and the mobile jaw will move towards the fixed jaw; the jaw gears will throw materials to the crushing wall powerfully, and stones will be crushed to little pieces; while it goes down, the angle will become smaller, while pulled by the draw bar and spring, the mobile jaw will leave the fixed jaw and crushed materials will be discharged frome the outlet. While the motor is rotating continuously, the mobile jaw will carry out periodical press and discharging and implement mass production.

1.The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity;
2.It has a big crushing ratio and even grain shape.
3.The gasket type inlet size makes flexible adjustment posible, and it’s reliable, conveinent, and with a big adjustment range,which can greatly enhance the flexibility of the equipments.
4.The lubrication system is safe and reliable, and it’s quite convinient to change components and there will be less maintenance needed.
5.It has a simple structure, and is quite stable and low in operation cost.
6.The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system.

Technical Parameter Of Jaw Crusher:

Mm to inch conversion: 25.4millimeters=1 inch

Model Max. Feeding
Size (mm)
Discharge
Size (mm)
Capacity (t/h) Motor
Power (kw)
Overall
Dimensions (mm)
Weight (t)
PE400×600 350 40-100 15-60 30 1700×1732×1653 6.5
PE500×750 425 50-100 50-100 55 2035×1921×2000 10.3
PE600×900 480 65-160 60-130 75 2290×2206×2370 16.5
PE750×1060 630 80-140 80-180 110 2620×2302×3110 29
PE900×1200 750 95-165 140-260 110 3789×2826×3025 54.5
PE1000×1200 850 195-265 315-550 110 3335×3182×3025 57
PE1200×1500 1020 150-300 400-800 160-220 4200×3750×3820 100.9

Note: Any change of Jaw Crusher technical data shall not be advised additionally.

Recommended Products: JC Series Jaw Crusher      [Stationary Crushing Plant]